bootdelay=1
#default bootcmd, will change at runtime according to key press
bootcmd=run setargs_nand boot_normal#default nand boot
#kernel command arguments
console=ttyS0,115200
nand_root=/dev/system
mmc_root=/dev/mmcblk0p7
init=/init
loglevel=5
extras=bootsata hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p50
#set kernel cmdline if boot.img or recovery.img has no cmdline we will use this
setargs_nand=setenv bootargs console=${console} init=${init} loglevel=${loglevel} ${extras}
setargs_mmc=setenv bootargs console=${console} init=${init} loglevel=${loglevel}
#nand command syntax: sunxi_flash read address partition_name read_bytes
#0x40007800 = 0x40008000(kernel entry) - 0x800(boot.img header 2k)
boot_normal=boota 40007800
#boot_normal=sunxi_flash read 40007800 boot;boota 40007800
boot_recovery=sunxi_flash read 40007800 recovery;boota 40007800
boot_fastboot=fastboot
#recovery key
recovery_key_value_max=0x13
recovery_key_value_min=0x10
#fastboot key
fastboot_key_value_max=0x8
fastboot_key_value_min=0x2