Cubieez Firmware Update  
=======================

1.Firmware List 
-------------

cubieez-ct-nand-v2.1.img.7z        |nand image     | 20141020
cubieez-ct-card0-hdmi-v2.1.img.7z  |tf card image  | 20141120

2.Features 
----------
-Kernel based on 3.4.79 cubietech 
-Based on Debian 7.6 Wheezy 
-Supported chromium-browser and web flash 
-Supported set HDMI monitor resolution
-Eabled bluetooth function 
-Both wifi and eth(dhcp) connection supported 
-Can supported 720p video player 
-Clock & date synchro with fake-hwclock (via ntp)
-LXDE base desktop with low mem consumption
-Audio CODEC (jack audio), sunhdmi (HDMI audio)  
-X11VNC, SSH (SFTP too) and other basic utils installed
-Gnome Mplayer (less CPU consumption than lxmusic)
-Benchmark tools (@ /root)
-SATA install supported 

3.README 
--------
- If this is your first boot, please open a Terminal (Ctrl+Alt+t) and run "cubie-config" as root
- Benchmark tools, Mali400 sources and more stuff can be found at /root
- X11VNC and SSH are running by default
- Youtube, Dailymotion, Crackle, etc can be viewed with root session
- Chromium can't run as root,please switch to cubie user
- Please run $ sudo ./usr/bin/open-bluetooth.sh as root to start bluetooth
- If you want to set monitor resolution , you can touch "monitor setting".
- If you Cubietuck can't mount sata,plaese format your sata device as root :
  Warnning :This Operation will clear all data in you sata,please make a backup
  1)log in as root with  X-window
  2)remove any usb disk device,insert you sata
  3)click "format-sata.sh" in the desktop,and "Execute" this script to format your sata


4.User&passwd 
-------------
-user: cubie passwd: cubieboard 
-user: root  passwd: cubieboard 

5.Installation  
--------------
1) Get tools : http://dl.cubieboard.org/model/cubietruck/Tools/
   Livesuit is nand tool for linux distribution
   PhoenixSuit is nand tool for windows 
   Win32diskimager is tf card tool for windows 
   Linux user can take "dd" to write image to tf card 
   
2) For nand installation When image writing is over,please pull out otg-usb cable,insert HDMI or VGA cable 
   power on with 5v-2A DC power supply,because the otg-usb can not provide such high current 

3) For card installation,this is a guide :   
http://dl.cubieboard.org/model/commom/docs/Linux-card-installation.pdf

5.Join in community 
------------------
http://www.cubieforums.com/ 

-----
thank you for your support 
support@cubietech.com